01480 860002

HomeEngine Management & SensorsCoolant Temperature sensor ECU A117E6017S

Coolant Temperature sensor ECU A117E6017S


Be the first to write a review

Coolant Temperature sensor ECU A117E6017S Image
Coolant Temperature sensor ECU A117E6017S Image Coolant Temperature sensor ECU A117E6017S Image Coolant Temperature sensor ECU A117E6017S Image Coolant Temperature sensor ECU A117E6017S Image Coolant Temperature sensor ECU A117E6017S Image

£12.95 EX VAT

There are 2 types of temperature sender,  Long and Short as shown in the pictures.

Please check yours prior to ordering.

Lotus original part number A117E6017S

The sensor is a thermistor which is a resistor that changes resistance value with temperature.

The ECT sensor is mounted horizontally and the water temperature gauge sensor s mounted in the same pipe vertically just below.

Normal running temperatures of 85 degrees will produce a resistance of 300 -400 ohms.

If the ECU receives a signal outside this range it will default to 60 degrees and the cooling fan will switch on

To replace the sensor disconnect the harness plug and position a container to catch coolant when the sensor is removed. Unscrew the sensor from the junction pipe.

Clean the threads of the pipe and apply Teflon tape to the thread before torqueing to just 6Nm.

Refit the plug and top up the lost coolant     

This fits the following models:

  • S2 K SERIES ELISE

Share this:






Eliseparts.Com Ltd
Unit 6 Lotus Court
Harvard Industrial Estate
Kimbolton
Cambridgeshire
PE28 0LS

01480 860002