01480 860002

HomeBrake System & AncillariesBrake Fluid Moisture Tester

Brake Fluid Moisture Tester


Be the first to write a review

Brake Fluid Moisture Tester Image
Brake Fluid Moisture Tester Image Brake Fluid Moisture Tester Image Brake Fluid Moisture Tester Image Brake Fluid Moisture Tester Image

£13.95 EX VAT

Easy to check your cars' brake oil quality.

For testing any Mineral Oil Brake Fluid DOT3 DOT4 DOT5.1

Brake fluid detection pen is based on the change in conductivity to determine the moisture level in your brake fluid.

It shows clearly the extent of moisture contained by the light-emitting diode, high moisture content will lead to lower boiling point, affect braking performance.

Red indicates the brake fluid needs immediate replacement, green represents good condition, yellow indicates the state is acceptable but replace soon.

1, The green LED lights = water content in the brake fluid H2O <1.5%, brake fluid good.
2, The yellow LED lights = brake fluid water content H2O = 1.5% to 3%, can continue to use, test again 1-2 months.
3, The red LED lights = water content in the brake fluid H2O> 3%, can not continue to use the brake fluid, needs to be replaced.
4, LED red flashing: requires battery replacement.
5, Green / yellow / yellow / red / red: shows water content of at least 4%, the brake fluid must be replaced immediately.

This fits the following models:

  • S1 K SERIES ELISE
  • S2 K SERIES ELISE
  • S1 EXIGE & MOTORSPORT
  • S2 2ZZ EXIGE
  • LOTUS 340R
  • S2 2ZZ ELISE 2004-2011
  • VX220 / SPEEDSTER
  • LOTUS EUROPA
  • LOTUS 2-ELEVEN
  • LOTUS EVORA
  • S3 1.6 ELISE 2011-2014
  • V6 EXIGE / ROADSTER & CUP
  • S2 1ZZ ELISE 2006-2010
  • S3 ELISE 2011-2020
  • LOTUS 3-ELEVEN

Share this:






Eliseparts.Com Ltd
Unit 6 Lotus Court
Harvard Industrial Estate
Kimbolton
Cambridgeshire
PE28 0LS

01480 860002