01480 860002

HomeTrack + PerformanceArmtech Battery Isolator

Armtech Battery Isolator


Be the first to write a review

Armtech Battery Isolator Image
Armtech Battery Isolator Image Armtech Battery Isolator Image Armtech Battery Isolator Image Armtech Battery Isolator Image

Sorry, this product is not available to buy online.

Get notified when this product is available:

The Armtech Hybrid Battery Isolator is an electromechanical replacement for the standard type master switch and offers a complete method of isolating the battery and protecting the alternator in one box with no external resistors or untidy wiring.

Used by many professional teams worldwide, the Armtech hybrid battery isolator is designed to be reliable and to have the capacity to cope with high power.

By using remote mounted switches to arm and disarm means that the unit itself can be chassis mounted, close to the battery to reduce the need for long battery cables to be used.

By isolating the vehicle's charging current as well as the battery earth, the Armtech isolator will kill engines with alternators making it suitable for motorsports use.

The Hybrid Battery Isolator consists of a heavy duty control box that is normally mounted close to the vehicle’s battery. Three remote switches (all supplied) control the unit; two cockpit mounted (one ‘ON’ and one ‘OFF’) buttons are operated by the driver and an external waterproof ‘OFF’ switch can be operated by the marshals in the event of an accident. Any number of additional switches can be added if required.

An indicator light on the unit lights when the unit is armed, as does another attached to the driver operated ‘ON’ switch.

The switches are wired to the unit using low voltage and current cable (not supplied). In the event of an accident where any of the cables are severed the unit will automatically be turned off.

A safety sticker sheet and full instructions are also supplied.

Black Box Dimensions 109 x 69 x 54mm
Overall Dimensions 156 x 69 x 62mm
Weight (approx) 700g
Temperature range -25°C to +85°C
Operating Voltage 9 -16V
Max Switching Current 1000A
Continuous Current 250A
Max Alternator Current 250A
Power Consumption 12W

Alternator protection circuit built into unit.

12 Volt negative earth only.

FIA Compliant.

This fits the following models:

  • S1 K SERIES ELISE
  • S2 K SERIES ELISE
  • S1 EXIGE & MOTORSPORT
  • S2 2ZZ EXIGE
  • LOTUS 340R
  • S2 2ZZ ELISE 2004-2011
  • VX220 / SPEEDSTER
  • LOTUS EUROPA
  • LOTUS 2-ELEVEN
  • LOTUS EVORA
  • S3 1.6 ELISE 2011-2014
  • V6 EXIGE / ROADSTER & CUP
  • S2 1ZZ ELISE 2006-2010
  • S3 ELISE 2011-2020
  • LOTUS 3-ELEVEN

Share this:

Related Products







Eliseparts.Com Ltd
Unit 6 Lotus Court
Harvard Industrial Estate
Kimbolton
Cambridgeshire
PE28 0LS

01480 860002