01480 860002

HomeEngine + GearboxEngine ComponentsAncillariesPG1 K Series Exedy Competition Clutch

PG1 K Series Exedy Competition Clutch


Be the first to write a review

PG1 K Series Exedy Competition Clutch Image
PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image PG1 K Series Exedy Competition Clutch Image

£279.95 EX VAT

Exedy Competition Clutch

Maximum clamp load is 685kg (AP is 770kg). EXEDY solution provides much easier driveability (Lighter clutch pedal).
 
EXEDY engineers have used a much stronger friction material (Organic – to retain driveability) which can increase the torque capacity to a whopping 280lb-ft.

Our figures actually indicate that it can actually handle up to 300lb ft, however we ALWAYS use a safety factor.
 
The usual steel backing is not required on the drive plate because of the high burst characteristics and friction coefficient of the friction material.
 
It has been burst tested to 15,000 RPM, whereas the Lotus MAX RPM is 7,500. There is no need to strengthen further.
 
Lighter clutch pedal than AP equivalent.
 
Stronger friction material than AP equivalent.
 
No need for steel backing as current disc / friction material is already of a significant strength.
  
Can handle 280 lb-ft at flywheel.
 

N.B. EXEDY Racing Clutch warranty is limited to the reimbursement or replacement of products which are deemed to have a material or design defect within 3,000 miles / 4,828km or 6 months from the date of purchase, whichever occurs first.

Bedding in Procedure
(303.34kb)

This fits the following models:

  • S1 K SERIES ELISE
  • S2 K SERIES ELISE
  • S1 EXIGE
  • LOTUS 340R
  • S1 MOTORSPORT ELISE / EXIGE

Share this:







Eliseparts.Com Ltd
Unit 6 Lotus Court
Harvard Industrial Estate
Kimbolton
Cambridgeshire
PE28 0LS

01480 860002